Fyxfer Heavy Duty Waste Crusher for Plastic Containers and Industrial Scrap

Product Description

MACHINE DETAILS

Technical Parameter	FY-SS01-300-2S	FY-SS01-400-2S	FY-SS01-500-2S
Motor Power / Quantity (Upper / Lower)	3 kW × 1 / 3 kW × 1	4 kW × 1 / 4 kW × 1	11 kW × 1 / 7.5 kW × 1
Total Motor Power (kW)	6	8	18.5
Motor Type	4-pole, both stages	4-pole, both stages	4-pole, both stages
Gear Reducer / Quantity (Upper / Lower)	JL4# × 1 / JL4#-21 × 1	JLK87-12 × 1 / JLK87-23 × 1	JLK97-15 × 1 / JLK97-23 × 1
Listed Rotational Speed (rpm, Upper / Lower)	15 / 21	15 / TBC	15 / TBC
Listed Torque (N·m, Upper / Lower)	4,500 / 4,800 (maximum input)	2,980 / 2,985 (input)	4,574 / 4,574 (input)
Shaft Diameter (mm, Upper / Lower)	Ø70 / Ø70	Ø60 / Ø60	Ø70 / Ø70
Blade Diameter × Thickness (mm, Upper / Lower)	Ø180 × 12 / Ø180 × 10	Ø180 × 15 / Ø180 × 8	Ø200 × 20 / Ø200 × 15
Blade Material	9CrSi	9CrSi	9CrSi

FY-SS01-300 Shredder

FY-SS01-300 is presented as a compact shredding workstation with a top-feed hopper, cutting chamber and discharge arrangement. Select the cutting and drive configuration according to the actual feed material, size and required production result.

Dual-Shaft Cutting Arrangement and Geared Drive

The detail image highlights a wide hopper, dual-shaft cutting chamber, control panel, steel frame and geared drive. The cutting arrangement and machine configuration must follow the approved model specification. Match the cutters to material hardness, thickness and desired reduction.

Select the Shredder Configuration for Your Scrap

The illustration is a series selection guide, not a list of capabilities included in one machine.

1.5 kW: suitable soft plastics, film, paper and selected small rigid plastic rejects; not thick solid blocks or metal scrap.

3 kW: selected rigid plastics, aluminum chips, copper wire, rubber hose and thin wood; solid blocks over 50 mm are excluded by the illustrated guide.

4 kW: selected rubber, wood, PE / PP, light aluminum profiles and fiberglass applications.

7.5 kW: selected thicker plastics, aluminum profiles, tires and light castings.

11 kW: selected cast aluminum, glass-filled plastics, appliance parts and mixed scrap after application review.

Manganese steel, complete motors, tangled materials and oversized solids require separate assessment and may be unsuitable. Suitability also depends on cutter design, feed size and contamination. Send scrap photos and maximum dimensions for a recommendation; use only the power and material scope approved for your model.

Application Examples across the Shredder Range

The range illustration shows electronic scrap, rubber products, textiles, paper and cardboard, plastic film, bottles, thin metal scrap and PE / PVC pipes. Each material requires a suitable machine, cutter and feed arrangement. Confirm hardness, thickness, size and contamination before selection; the full illustrated range is not the capability of every model.

From Bulky Scrap to Smaller Pieces

The images illustrate reduction of rigid plastic and thin metal scrap on suitable shredder configurations. Final piece size, consistency and output depend on the feed, cutter geometry and operating arrangement. Thin-metal examples do not establish metal-processing capability for every small model; assess the actual material before selection.

Shredder Selection and Support Questions

*What can FY-SS01-300 process?

Suitability depends on material hardness, thickness, shape, contamination and the approved cutter and drive configuration. Sample testing is recommended.

*What information is needed for selection?

Provide photos or video, maximum feed size, required output size, target capacity, feeding method, daily operating hours and local voltage.

*What determines the output size?

Cutter width, geometry and operating setup affect the pieces produced. Screen aperture applies only where a screen is fitted; some primary-shredding arrangements use no screen.

*What happens if it jams?

Overload stopping and automatic reversing depend on the supplied controls. Confirm PLC functions, emergency stop and motor protection for the selected configuration.

What support is available?

*Service includes a 36-month warranty, remote technical support, operation training and spare-parts assistance. Confirm coverage, start date and final supply scope in the order documents.